Our Location

Brugata 1

0186 Oslo

Norway

Elias Bakken

Elias Bakken

Getting Started with Recore A8

A new video has just dropped on YouTube the subject of getting started with Recore A8. The main focus is show newcomers how to set up the board when it first arrives and how to “find it”. There is also…

Recore A8 is now shipping!

After a long development cycle, Recore A8 is now finally shipping! Besides moving to new JST connectors, the focus for A8 has been on stability. Specifically by doubling the available current from the 5V step down converter from 4 A…

Rebuild and Reflash v1.0.1

Some small changes has come to Rebuild and Reflash in the last few weeks! And now version 1.0.1 has been release and marked as the latest for both versions. For those who don’t know, Rebuild is the software/OS that runs…

Reflash: A new way to upgrade firmware

Reflash has recently undergone a pretty large change. It has become faster and more secure by changing from using a software “switch” to a hardware “key” to access a higher security level. This blog post will give a written account…

Recore calibration results

The last few months have been spent calibrating and tuning the four different temperature sensors available on Recore A5 and A6. To aid with the calibration, a dry well calibrator was created that is controlled with Recore and with results…

Recore rev A6 is shipping

The development of Recore is moving along. The latest revision of the hardware is A6. The rate of change on the hardware development side of Recore is slowing down. That means it is almost perfect. The biggest changes from A5…

Recore is Finally Printing!

The new 3D-printer control board (Recore) that was started in 2019 is now mature and ready to start shipping to customers. We are now at revision A5, but the A4 was also working fine, it was just a few minor…

Manga Screen 2 Big has shipped

This calls for celebration! The Manga Screen 2 that was Kickstarted in August 2017, has finally been shipped out to the backers. All Kickstarter campaigns seem to get delayed, and this one was no exception. Manufacturing always has a tendency…

New reseller for Replicape: Seeed Studio

I’m pleased to announce that Seeed Studio is now selling Replicape Rev B from their online Bazar! Seeed Studio has over 300 distributors world wide, a great selection of BeagleBones including their own version BeagleBone Green, and a great deal…