Skip to content
www.iagent.no
  • Home
  • Shop
  • About
  • News
www.iagent.no

News

Recore calibration results
Recore

Recore calibration results

ByElias Bakken April 7, 2022April 7, 2022

The last few months have been spent calibrating and tuning the four different temperature sensors available on Recore A5 and A6. To aid with the calibration, a dry well calibrator was created that is controlled with Recore and with results plotted in OctoPrint. Below is a video explaining how it was done. This post adds…

Read More Recore calibration resultsContinue

Recore rev A6 is shipping
Recore | Refactor

Recore rev A6 is shipping

ByElias Bakken January 13, 2022January 13, 2022

The development of Recore is moving along. The latest revision of the hardware is A6. The rate of change on the hardware development side of Recore is slowing down. That means it is almost perfect. The biggest changes from A5 to A6 are: External r_sense resistors for the TMC2209s. Better ESD protection for CE compliance…

Read More Recore rev A6 is shippingContinue

How Recore is Tested and Calibrated
Recore

How Recore is Tested and Calibrated

ByElias Bakken August 3, 2021

There is now a new video out documenting how Recore A5 is tested and calibrated. This blog post will act as a supplement to the video, giving some more detail and offering the material as a readable reference. Functional testing The testing procedure for Recore is done by the board itself. This is convenient because…

Read More How Recore is Tested and CalibratedContinue

Recore is Finally Printing!
Recore

Recore is Finally Printing!

ByElias Bakken June 4, 2021June 4, 2021

The new 3D-printer control board (Recore) that was started in 2019 is now mature and ready to start shipping to customers. We are now at revision A5, but the A4 was also working fine, it was just a few minor tweaks related to testability mostly. But this blog post and accompanying video will be centered…

Read More Recore is Finally Printing!Continue

Manga Screen 2 Big has shipped
Manga Screen 2

Manga Screen 2 Big has shipped

ByElias Bakken June 20, 2018June 20, 2018

This calls for celebration! The Manga Screen 2 that was Kickstarted in August 2017, has finally been shipped out to the backers. All Kickstarter campaigns seem to get delayed, and this one was no exception. Manufacturing always has a tendency to take much longer than expected, and 9 months is not unusually long. The feedback…

Read More Manga Screen 2 Big has shippedContinue

New reseller for Replicape: Seeed Studio
Replicape

New reseller for Replicape: Seeed Studio

ByElias Bakken September 4, 2017September 4, 2017

I’m pleased to announce that Seeed Studio is now selling Replicape Rev B from their online Bazar! Seeed Studio has over 300 distributors world wide, a great selection of BeagleBones including their own version BeagleBone Green, and a great deal on shipping, making them an ideal reseller. For starters it’s a 2 week test to…

Read More New reseller for Replicape: Seeed StudioContinue

Manga Screen 2 is coming to Kickstarter
Manga Screen

Manga Screen 2 is coming to Kickstarter

ByElias Bakken June 11, 2017August 29, 2017

The Kickstarter for Manga Screen has been postponed again and again, but now the first promotional video of the new screen is finally hitting the streets! It’s a trailer for the Kickstarter, showing one of the applications that it can be used for. The application is called Karma-button, an app for giving creds to others…

Read More Manga Screen 2 is coming to KickstarterContinue

Improved automatic bed leveling in Redeem
Redeem | Replicape

Improved automatic bed leveling in Redeem

ByElias Bakken February 22, 2017

Automatic bed leveling helps improve first layer height above bed. That is very useful, because if the first layer does not stick, the rest of the print does not matter. It also lowers the bar for first times to get started, and it saves a bunch of time for old-timers that have moved their printer….

Read More Improved automatic bed leveling in RedeemContinue

PID autotune algorithm improvements
Redeem

PID autotune algorithm improvements

ByElias Bakken January 6, 2017

Redeem is quickly becoming the standard in 3D printer firmwares with self documenting G-codes and pre-processing path planner. Up until recently, two fairly standard features have had somewhat sub-par performance: PID auto-tune and automatic bed calibration. A recent poll on the Thing-printer G+ page revealed that these two things were on the top of list…

Read More PID autotune algorithm improvementsContinue

Flashing a BeagleBone Black with etcher.io
Beaglebone | Kamikaze | Replicape

Flashing a BeagleBone Black with etcher.io

ByElias Bakken May 12, 2016

The instructions for flashing a BeagleBone Black has long been in dire need of an update, and that day has finally come! The etcher.io (Etcher by RESIN.IO) is a beautifully designed app that runs on Linux, Windows and OS X alike and it does one thing: Burn images to SD cards. Since Kamikaze is based…

Read More Flashing a BeagleBone Black with etcher.ioContinue

Page navigation

1 2 3 … 5 Next PageNext

Thing store

This web shop is a place to purchase thing-printer parts.

Resources

  • Privacy Policy
  • My account
  • Terms and Conditions
  • Shipping and Returns
Instagram YouTube Github Discord

© 2022 www.iagent.no

Review Cart

No products in the cart.

  • Home
  • Shop
  • About
  • News