Comments for www.iagent.no https://www.iagent.no/ High end 3D printer electronics Fri, 06 Aug 2021 05:20:21 +0000 hourly 1 https://wordpress.org/?v=6.9.1 Comment on How Recore is Tested and Calibrated by Old-fashioned test equipment addiction is reasonable – Lariva Business https://www.iagent.no/2021/08/03/how-recore-is-tested-and-calibrated/#comment-102461 Fri, 06 Aug 2021 05:20:21 +0000 https://www.iagent.no/?p=3054#comment-102461 […] 3D printing board developer [Elias Bakken] have Release of automatic test procedures He used a stack of four (at least) old HP test equipment for development. In addition, his test […]

]]> Comment on Recore is Finally Printing! by 3D打印机板通过全志A64的AR100内核实现了实时控制 - CNX Software中文站 https://www.iagent.no/2021/06/04/recore-is-finally-printing/#comment-102384 Wed, 16 Jun 2021 04:01:59 +0000 https://www.iagent.no/?p=2982#comment-102384 […] 如果你想了解更多关于 Elias 在 AR100 内核上的工作，请查看他近期的博客文章，其中有他解释如何使用实时内核比使用Linux更快、更可预测地切换管脚，在Cortex-A53 内核和AR100之间设置UART通信以及设置计时器的挑战等内容。如果你更喜欢视频格式的解释，请观看下面的视频。 […]

]]> Comment on Recore is Finally Printing! by Recore Hacks The Hidden Microcontroller For 3D Printing - USA Daily https://www.iagent.no/2021/06/04/recore-is-finally-printing/#comment-102367 Mon, 14 Jun 2021 08:58:32 +0000 https://www.iagent.no/?p=2982#comment-102367 […] the world of 3D printers, [Elias Bakken] from the [Intelligent Agent] workshop has released a new controller board called Recore. The typical 3D printer has a dedicated controller which handles the real-time aspects of driving […]

]]> Comment on Recore is Finally Printing! by Recore piratea un microcontrolador oculto para impresión 3D - Govannom https://www.iagent.no/2021/06/04/recore-is-finally-printing/#comment-102362 Mon, 14 Jun 2021 08:52:00 +0000 https://www.iagent.no/?p=2982#comment-102362 […] de las impresoras 3D, [Elias Bakken] desde el [Intelligent Agent] Workshop ha lanzado un nuevo placa controladora llamada Recore. La impresora 3D típica tiene un controlador dedicado que maneja aspectos en tiempo real de la […]

]]> Comment on Recore is Finally Printing! by Placa de impresora 3D utiliza el núcleo AR100 de Allwinner A64 para control en tiempo real - CNX Software https://www.iagent.no/2021/06/04/recore-is-finally-printing/#comment-102353 Wed, 09 Jun 2021 09:43:07 +0000 https://www.iagent.no/?p=2982#comment-102353 […] más información sobre el trabajo de Elias en el núcleo AR100, consulte su publicación de blog reciente donde explica cómo usó el núcleo en tiempo real para alternar los pines de […]

]]> Comment on Recore is Finally Printing! by В плате 3D-принтера используется ядро ​​AR100 Allwinner A64 для управления в реальном времени — CNXSoft- новости Android-приставок и встраиваемых систе https://www.iagent.no/2021/06/04/recore-is-finally-printing/#comment-102345 Sat, 05 Jun 2021 18:48:09 +0000 https://www.iagent.no/?p=2982#comment-102345 […] о работе Элиаса над ядром AR100, ознакомьтесь с его недавним постом в блоге, где он объясняет, как он использовал ядро реального […]

]]> Comment on Recore is Finally Printing! by 3D printer board leverages Allwinner A64's AR100 core for real-time control - CNX Software https://www.iagent.no/2021/06/04/recore-is-finally-printing/#comment-102336 Sat, 05 Jun 2021 03:32:08 +0000 https://www.iagent.no/?p=2982#comment-102336 […] you’d like to learn more about Elias’ work on AR100 core, check out his recent blog post where he explains how he used the real-time core to toggle the pins much faster and predictably […]

]]> Comment on Toggle 1.0 Introduction video by kinio https://www.iagent.no/2016/05/04/toggle-1-0/#comment-99491 Mon, 09 Dec 2019 13:36:00 +0000 http://www.thing-printer.com/?p=1416#comment-99491 Can run on LCD 4DCAPE-43T ?

]]> Comment on Filament sensor on 3D printer with Replicape by AcrimoniousMirth https://www.iagent.no/2016/04/23/filament-sensor-3d-printer-replicape/#comment-93374 Sun, 15 Apr 2018 21:48:22 +0000 http://www.thing-printer.com/?p=1312#comment-93374 Has there been any work done to differentiate between skipped steps/blockages and filament runout?

]]> Comment on Improved automatic bed leveling in Redeem by Christopher Burns https://www.iagent.no/2017/02/22/improved-automatic-bed-leveling-in-redeem/#comment-92617 Fri, 02 Feb 2018 17:47:01 +0000 http://www.thing-printer.com/?p=1704#comment-92617 What exactly happens when you do G29.2? I see that code is generated in the terminal, Is it stored somewhere or is it a cut and paste deal?

]]>