Comments on: Flashing a BeagleBone Black with etcher.io https://www.iagent.no/2016/05/12/flashing-beaglebone-black-etcher-io/ High end 3D printer electronics Thu, 23 Nov 2017 11:00:41 +0000 hourly 1 https://wordpress.org/?v=6.9.4 By: Federico Funes https://www.iagent.no/2016/05/12/flashing-beaglebone-black-etcher-io/#comment-91896 Thu, 23 Nov 2017 11:00:41 +0000 http://www.thing-printer.com/?p=1428#comment-91896 In reply to Tom Dzamba.

Hi Tom!
I think I had the same problem with the same platform (BBBW)!
Just want to know if you have already solved it. If yes I’d like to know how!
Thank you!

]]> By: Elias Bakken https://www.iagent.no/2016/05/12/flashing-beaglebone-black-etcher-io/#comment-90322 Mon, 08 May 2017 18:01:31 +0000 http://www.thing-printer.com/?p=1428#comment-90322 In reply to Tom Dzamba.

BeagleBone Black Wireless is still so new that it has some issues. Your best bet is to get the latest Umikaze that Jon_c makes as a community image. Go to replicape.slack.com and ask in the develop channel!

]]> By: Tom Dzamba https://www.iagent.no/2016/05/12/flashing-beaglebone-black-etcher-io/#comment-90312 Sat, 06 May 2017 16:55:59 +0000 http://www.thing-printer.com/?p=1428#comment-90312 Hi Elias.

I am trying to setup Kamikaze on my beaglebone black wireless. However, I am having trouble getting my images to boot off the SD card after flashing.
– I am flashing with Etcher, and everything seems to go well there.
– When I try to boot, I hold down the boot button and then power on. My LEDs just stay solid (all 4 of them). No change, regardless of how long I hold.
– I have tried both the 2.1.0b, and 2.0.8 images. I even verified the download of the 2.1.0b image with the corresponding checksum.
– I have tried using numerous different 4GB SD cards, but still no luck.

Hoping you could shed some light on what might be happening. Any advice would be greatly appreciated.

Thanks,

Tom

]]>